Measurement technology for liquid analysis
Webinar recordings and learning videos on the topic
Here you find practical information on measuring pH, redox potential, conductivity, free chlorine, oxygen, turbidity, etc. The videos also show how to use our transmitters and digital sensors.
video
Safe startup and maintenance of pH measurement chains
This video covers the essentials of working with pH measurement chains.
video
pH measurement in detail
Based on the webinar "Safe startup and maintenance of pH measurement chains" this recording covers specific topics.
video
Configuration and calibration of the JUMO digiLine pH sensor electronics using Digital Sensor Management
The video demonstrates, using an example, how to commission sensor electronics using the DSM.
video
Basic principles of redox potential measurement and use of the measurement technology
The video shows how to safely measure redox potential.
video
Basics video: Measurement of electrolytic conductivity
This video covers the basics of measuring conductivity using the conductive measurement principle. In addition to the measurement principle, it explains terms such as relative/nominal cell constant, linear temperature compensation, and temperature coefficient. It also demonstrates how to set up a measurement chain for the AQUIS touch P.
video
Example of commissioning a measurement chain for measuring electrolytic conductivity (conductive)
This video demonstrates the setup of a measurement chain consisting of an AQUIS 500 CR and a tecLine CR-GT conductivity cell. It also provides some tips and highlights the importance of temperature compensation (linear and natural water).
video
Exact determination of compensated conductivity, TDS value, and concentration of lyes and acids with JUMO transmitters
Based on the webinar "Basic principles of conductive conductivity measurement," this recording covers more advanced topics.
video
Measuring conductivity in ultra-pure water-tips and tricks!
The video provides guidance on measuring conductivity in ultrapure water.
video
Use of the conductive, four-pole conductivity sensor JUMO BlackLine CR 4P
This webinar recording introduces the four-pole conductivity sensor and demonstrates its application.
video
Application of inductive conductivity measurement technology
This webinar describes the simple and practical application of inductive conductivity measurement technology.
video
JUMO digiLine CR/Ci with analog outputs and switching outputs
The video introduces the transmitter and demonstrates how to use it.
video
Basic principles of chlorine measurement and use of measurement technology
The video demonstrates how to use our chlorine sensor.
video
Application of the JUMO digiLine O-DO S10 oxygen sensor
This video provides a compact overview of the oxygen sensor, explains its measuring principle, introduces the available fittings, and demonstrates the commissioning process.
video
Basic principles of turbidity measurement and use of measurement technology
This video covers the basics of turbidity measurement and explains how to set up and maintain the measurement chains.
video
JUMO AQUIS touch as controller
This video describes the capabilities of the AQUIS touch's controller function and demonstrates how to set it up as a controller.
video
Connection of JUMO digiLine sensor technology to a JUMO AQUIS touch S/P
The video shows how the digital sensor technology is connected to the AQUIS touch.
video
Ammonia leakage monitoring in cooling circuits
The recording describes how the sensor is used to monitor the entry of ammonia into a secondary cooling circuit.